MOQ | 1 Piece |
Condition | New |
Model | Applied wire diameter(mm) | Tension scope(g) |
MTCSS | φ0.03-φ0.07 | 4.0g-40g |
MTCS | φ0.04-φ0.14 | 10g-120g |
MTCM | φ0.08-φ0.25 | 50g-400g |
MTCL | φ0.12-φ0.35 | 80g-600g |
MTCLL | φ0.14-φ0.40 | 100g-800g |
Product
feature
1.Large
tension range, using the latest wire jump-prevent structure;
2.Tension scale is precise with tension value, which is
convenient for testing of several machines. 3.Mounting diameter
is 16mm, vertical type, anti-tension rod with big swings and long
wire reel.
4.Tension generated with multi NS magnetic field, no mechanical
friction, and with stability tension;
5.The main components :O-ring, and all imported bearings and
supurb quality.
Note:
1.Please
reading the product instruction carefully before using;
2.If long time without using. When the damping wheel jitter,
before starting please turning to degaussing process first
clockwise and then counterclockwise tension adjuster to adjust
the maximum to the minimum to complete the degaussing.
3.When debugging, first adjust the tension to the scale position,
and then adjust the Anti-back tension, adjustment knob makes the
tension rod under the green logo(slightly lower than the level
state)
4.The reason for the tension can't adjust:
Hang line diagram
1)The wool pre-tighten is not enough need to be adjust it;
2)The O-Ring and the wool felt is too dirty need to be clean ot
replace.
5.Normally working the tension can be adjusted from small to
large (clockwise), prohibit the tension by major to small
(counterclockwise), otherwise cause breakage.
6.When replace Wool felt please according to the thickness and
size with the factory, or it will cause the wire not
smoothly.
Product
Picture
email:******
mobile
phone:********