Smart 12V 24V 2A 8A 15A Digital Display Inverter Solar Lithium Battery Charger

Name: Smart 12V 24V 2A 8A 15A Digital Display Inverter Solar Lithium Battery Charger
Brand: Shenzhen CTECHi Technology Co., Ltd.
SKU: Tradewheel_2776445
Availability: InStock

FOB Price 32.2 - 32.2 USD / pieces

Contact Now

Quick Details (View All)

Place of Origin	Guangdong, China	Brand Name	CTECHi/Customized
Model Number	BF1212	Output Type	AC

Product Details

Products Description

Soft start
The input and the output of the charger contain a soft start. This way the charger does not influence the DC and AC systems.
Current limitation
The charger incorporates a current limitation feature.
Temperature sense monitoring
The temperature protection as described above, is monitored. If the charger cannot carry out internal temperature measurements due to a broken temperature sensor, the charger shuts down. The” Power” LED will light up red. This way the charger is maximally protected against overheating.
Input voltage protection
If a fault may occur on the input, the charger is protected using a fuse. This fuse can be reached by removing the bottom plate of the charger. It is located at the input side, where the power cord enters the charger. For replacement, always use a fuse with the same value as the original one
Input voltage monitoring
If the input voltage drops below 180VAC, the charger will protect itself and pause the charging process. The “ power” will light up red. The charge process will be continued automatically if the input voltage has risen to 190V AC again.
Automatic voltage compensation
The charger automatically compensates for the voltage drop over the connection cable. This compensation is optimized for the standard cable length of 1 meter. To secure the correct working of the voltage compensation, it is preferred not to change the length of the cables.
Battery voltage protection
After switching on, the charger first monitors the battery voltage. If the charger doesn’t detect a battery, the power LED will light up red. If the charger measures a battery voltage that is too low, so that the battery is discharged too deeply, the power LED will light up red for 3 minutes as a warning, the charging process will not start when the battery voltage is too high. Then the power LED will also light up red.
Temperature-compensated charging system
By connecting the optional temperature sensor, it is possible to adjust the charging process based on the battery temperature.Read more about this in the relevant chapter
Level of protection
The indication for the degree of protection contains the character” IP” (international protection) followed by two or three digits that stipulate the conditions that it complies with. The first digit refers to the class of protection for density, the second digit to the fluid density, and the last digit refers to the impact resistance. The battery charger can be assigned IP205, which means :2= the charger is protected against solid particulate larger than 12mm. 0= the charger is not protected against water/liquid etc. 5= the charger can bear an impact force of 2.00 joule (2Nm) max.

Specification

Model	BF1212	BF1225	BF12/24-12
Input Voltage	220VAC/50Hz			220VAC/50Hz	220VAC/50Hz
Input voltage range	200-250V AC			200-250V AC	200-250V AC
Input Current	1.5A	3A	1.5A/3A
Max Output Current	12A	25A	12A/25A
Constant Output Voltage	14.4士0.2VDC			14.4士0.2VDC	14.4士0.2VDC
Current selection key	2A/ 8A/12A charging	2A/ 10A/25A charging	2A/ 10A/25A charging
8 Stage charging	Desulphation, soft start, bulk, absorption, analysis,			Desulphation, soft start, bulk, absorption, analysis,	Desulphation, soft start, bulk, absorption, analysis,
8 Stage charging		Recond, float, pulse			Recond, float, pulse	Recond, float, pulse
Charging Battery type	AGM, GEL, Li-batteries, Lifepo4			AGM, GEL, Li-batteries, Lifepo4	AGM, GEL, Li-batteries, Lifepo4

Detail Description

Product Categories

Why Choose Us

1.CTECHi focus on the battery industry for more than 19 years;

2.We have an experienced technical team of over 300 engineers；
3.UL,CE,RoHs,UN38.3,MSDS,IEC etc;
4.Logo customization renderings will be produced within 1 working day；
5.Using A cells, the quality is visible.

Company Profile