Shliangshi High quality shot blasting machine blasting wheel blade control cage impeller with Siemens motor EU standard

Characteristics

1. The shot blasting wheel is assembled directly into the machine. It has such advantages as long service life, stable operation, low temperature and low noise

2. The double disc is made of GCr15 bearing steel, which has good dynamic and static balance and wear resistance.

3.The shots are initially accelerated in the distribution wheel that rotates synchronously with the blasting machine, which ensures that the shots are transmitted to the blade almost without vibration.

4. The blades, control cage, distribution wheels and other wearing parts of shot blasting wheel are made of special production technology, careful batching, melting and casting. The weight difference of each group of blades is strictly controlled within 5g, which reduces the operating noise and prolongs the service life of wearing parts.

5. The impeller of this shot blasting wheel is forged to ensure the balance of the operation of the shot blasting machine, so that its balance torque is between 12-15N.mm (national standard ≦18.6N.mm).

.6. Quickly assemble and dismantle the blades: the blades don’t need such fixtures as screws, flat pins and spring clam to fix. They are inserted into the impeller groove from the center of the impeller, when the impeller rotates, they are fixed under the action of centrifugal force generated by the blades, so they don’t need any clamping. It is convenient to replace the blade, because it is fixed by centrifugal force, resulting in the replacement of the blade at the same time, the control cage and distribution wheel must be taken out first, so the abrasion of the control cage and distribution wheel can be checked as well.