Model NO. | ETY150MS-III | Power Source | Electric |
Controlling Mode | CNC | Automatic Grade | Automatic |
Setting Mode | Floor-type | Precision | High Precision |
Certification | GS, CE, ISO 9001 | Condition | New |
Control System | Fanuc, Siemens, Mitsubishi | Spindle | A2-6,A2-8,A2-11 |
Chuck | 6,8,10,12inch | Tool Turret | Vdi or Bmt |
Motor Power | 11,15,18.5,22kw | Transport Package | Plywood Case |
Specification | 2200*2100*1700 | Trademark | Oturn |
Origin | China | HS Code | 8458110090 |
Production Capacity | 1000/Year |
High-strength HT300
one-piece structure
casting
iron
bed,
30-degree step type
flat rail structure, application of
finite element analysis, excellent overall mechanical
rigidity and stability, and can maintain long-term reliable
accuracy, processing stability and tool life, stress relief
treatment improve
accuracy and stability, high-strength roller rail design,
drive system adopts screw pre-tension design, improve
response
rigidity.
Both ends of the workpiece can be
processed at the same time in one clamping, which greatly
simplifies the manual operation, increases the output and
reduces the process. The second spindle is capable of full
turning and can express workpieces during machining,
reducing cycle
times.
1.Direct
drive synchronous electric spindle device: magnetic
ring type
incremental encoder (Sine and
cosine) positioning accuracy: 20 arc seconds, C-axis
indexing accuracy: 40 arc
seconds.
Effectively eliminate the vibration
of spindle,
and the deflection accuracy of the nose end is within
0.002mm.
Improve the surface finish of the
workpiece.
The rear-mounted rotor is used to
facilitate installation and
maintenance.
The spindle motor is equipped with
cooling system to suppress the influence of thermal
displacement and ensure a constant working temperature of
the spindle. The spindle system has passed the strict
dynamic balance test. It has good precision retention, high
rigidity and high efficiency, so that the machine can not
only complete finishing machining, but also rough machining
and heavy cutting for users. It is especially suitable for
mass production of complex shapes and high
finish product.
2.High rigidity integral servo power
turret. With rapid and precise tool change performance. The
tool holder installation used high-rigidity BMT interface,
and the power transmission shaft is driven by servo spindle
motor.
3.The machine is equipped with THK
linear guide rail and ball screw. The heat-treated and
precision-ground ball screw can ensure the best precision
and durability. Each axis adopts a direct transfer shaft
structure and a double-anchor pre-relay method, which can
minimize thermal displacement and greatly improve machining
accuracy. High rigidity, large size, and heavy-duty linear
slide rails can keep the accuracy of the machine unaffected
when it is impacted, the displacement is smooth and the
noise is low, which can prolong the service
life.
4.Standard configuration FANUC
system, and the feed drive adopts FANUC servo
motor.
5.Perfect hydraulic and lubrication
system, using high-quality hydraulic pumps, hydraulic
valves and other components, greatly reducing the failure
rate. The design of the hydraulic and lubrication system is
simple and
reliable.
6.Using Taiwan rotary chuck, oil
cylinder and automatic chip removal device, which can
greatly reduce the labor intensity of the operator and
realize safe and efficient production. The above functional
components can be controlled by programming. Special
fixture.
Item | Unit | 150MS-III/E |
Max.swing diameter over bed | mm | ?380 |
Max.processing diameter | mm | ?100 |
Max.processing
diameter Over tool holder |
mm | ?160 |
Max.processing length | mm | 150 |
Spindle nose | type | A2-5 |
Max.speed of spindle | rpm | 5500 |
Oil cylinder/Chuck | " | 6 |
Spindle bore diameter | mm | ?56 |
Bar diameter | mm | ?45 |
Direct drive spindle motor power | kw | 17.5 |
Spindle torque | N.m | 62-125 |
Sub spindle nose | type | A2-4 |
Max.speed of Sub spindle | rpm | 6000 |
Oil cylinder/collect | " | 5 |
Sub spindle bore diameter | mm | ?46 |
Bar diameter | mm | ?32 |
Direct drive sub spindle motor power | kw | 11 |
Sub spindle torque | N.m | 27-66 |
X1/Z1 motor power | kw | 1.8/1.2 |
X2/Z2 motor power | kw | 1.2/1.2 |
X1/Z1 travel | mm | 135/370 |
X2/Z2 travel | mm | 215/400 |
X1/Z1/X2/Z2 fast moving | m/min | 30/30/30 |
X1/Z1 slide rail type | / | Roller 35/35 |
X2/Z2 slide rail type | / | Roller 30/30 |
Positioning accuracy | mm | ±0.005 |
Repeat positioning accuracy | mm | ±0.003 |
Upper power turret type | / | BMT45-12T |
Upper power turret motor | Kw/N.m | 2.2/26 |
Max.speed of upper power turret | rpm | 6000 ER20 |
Specification of outer diameter tool holder | mm | 20x20 |
Specification of inner diameter tool holder | mm | ?32 |
Adjacent tool change time | sec | 0.15 |
Lower power turret type | / | BMT40-8T |
Lower power turret motor | Kw/N.m | 2.2/26 |
Max.speed of lower power turret | rpm | 6000 ER20 |
Max.speed of lower power turret | mm | 20x20 |
Specification of outer diameter tool holder | mm | ?25 |
Specification of inner diameter tool holder | sec | 0.15 |
Machine dimension | m | 2.2x2.1x1.7 |
Machine weight | kg | 3500 |
Cutting fluid tank volume | L | 180 |
Hydraulic unit box volume | L | 40 |
Hydraulic pump motor power | kw | 1.5 |
Lubricant oil tank volume | L | 2 |
Automatic lubrication pump motor power | W | 50 |
Cooling water pump power | W | 750 |
Q1:How can l choose the most suitable machines ?
Please tell me your specications,we can choose the best
model for you,or you can choose the exact model,you can
also send us the products drawing,we will choose the most
suitable machines for you .
Q2: Whats your main products of your company?
We specialized in all kinds of machines,such as CNC Lathe
Machine ,CNC Milling Machine,CNC Turning Maching,Vertical
Machining Center ,Horizontal Machining Center,Lathe
Machines,Turning and milling composite processing so
on.
Q3: Where is our factory located? How can l visit
there?
We have 5 factories located in Guangzhou, Quzhou, Ningbo,
and Guangdong.You are warmly welcomed to visit us.
Q4. How do you transport it?
Provide Transportation Solution DDP/CIF/FOB/FCA
Q5: Whats the Payment Terms ?
T/T ,30% initial payment when order,70% balance payment
before shipment .
06: Whats the MoQ?
A: 1 set .(Only some low cost machines will be more than 1
set )
We want to know:
1.We strongly suggest you to tell us size, material of your
workpiece for our evaluation if possible, better to send us
workpiece drawing, so that we can recommend you most
suitable model!
2.lf need ClF Price, please kindly tell us the port of
destination.