Automatic Facial Mask
Cutting Machine
Use:
The machine
SSGZ-99 is designed as folding solution for shaped facial
mask.It completes the automatic process of mask cutting,
folding in pouch,pouch
detection,empty pouch detection,failed pouch rejection,pouch
collecting.
Process:
Automatic roll
cutting,Automatic folding,Bag taking,Bag opening,Bag feeding
and output of mask cloth coil
Specification:
Model
NO.
|
SSGZ-99
|
Capacity
|
3000-3500 pcs/hour
(depending on the mask
material)
|
Folding
time
|
3 or 4
folds
|
Bag size
range
|
(L)140-200mm
(W)95-160mm
|
Gas
pressure
|
0.6Mpa
200L/min
|
Coil
size
|
Coil width 270-280,inner
diameter pf roll 76,and outer diameter of roll
600mm
|
Total
Power
|
2.5KW
|
Power
Supply
|
220V/1PH/50HZ
|
Machine
weight
|
About
467kgs
|
Machine
dimension
|
1930*900*1580mm
(LxWxH)
|
Equipment
configuration:
No
|
Part
|
Brand
|
1
|
PLC
|
HCFA
|
2
|
Touch screen
|
KINCO
|
3
|
Servo motor
|
KINCO
|
4
|
Servo driver
|
KINCO
|
5
|
Cylinder
|
Airtac
|
6
|
Solenoid valve
|
Airtac
|
7
|
Sensor
|
Riko
|
8
|
Frequency converter
|
Delta
|
Auto Liquid
Filling and Sealing
Machine
Use:
Fully automatic
horizontal bag feeder has the functions of automatic bag
feeding, bag opening, filling and filling, sealing and
output.
Specification:
Model
NO.
|
MSP
|
Capacity
|
1800-2000
bags/hour(depending on
bag material, filling amount and other
factors)
|
Pouch
size
|
Minimum(L)80mm
Minimum(W)80mm
|
Suitable bag type
|
Four-sided sealed bag, zipper bag, suction nozzle
bag, etc.
|
Gas
pressure
|
0.6Mpa
200L/min
|
Power
|
2.0KW
|
Power
Supply
|
220V/50HZ
|
Machine
weight
|
About
280kgs
|
Machine
dimension
|
1600*910*980mm
(LxWxH)
|
Equipment
configuration:
No
|
Part
|
Brand
|
1
|
PLC
|
HCFA
|
2
|
Touch Screen
|
KINCO
|
3
|
Cylinder
|
Airtac
|
4
|
Solenoid valve
|
Airtac
|
5
|
Fibre amplifier
|
Tiangong
|
6
|
Frequency converter
|
Delta
|
Advantages:
1.PLC and touch
screen for easy operation
2.Machine use
servo motor and cylinder for mechanical
driving
3.Equip with
Optical Fiber Sensor (OFS) to monitor the folding and
filling process,no raw material face mask,no filling.Ensure
every pouch is well filled with mask
inside.
4.Use pneumatic
sucker as pouch feeding system,ensure the process be smooth
and efficient.
5.Use stainless
steel as main material to ensure the clean and safe
production.
6.The machine
is able to fit with two folding & three folding & four
folding automatically,no need to change any
parts.
7.The machine
is able to work with different shape
pouch.
8.The machine
is small size,require small space
occupation.
Packing Leaders plant covers an area of 10,000 square meters
and employs more than 50 highly skilled workers. We produce
more than 300 packaging machines per year and sell them to
more than 40 countries around the world.
Packing Leaders plant covers an area of 10,000 square meters
and employs more than 50 highly skilled workers. We produce
more than 300 packaging machines per year and sell them to
more than 40 countries around the world.
At Packing leader, we design/develop all the machines. After
the installation and debugging of the machines in the factory
by high-tech masters, they are packaged and sent to your
company. The installation is not complete until the machine
is connected to the host and debugged to a normal and stable
operating state as required.
After the assembly workers
get the drawings, they assemble the machine in strict
accordance with the drawings and the instructions of the
design department personnel. During the installation
process, the safety performance check of the machine is
carried out simultaneously.
After the assembly workers
install, the companys special inspection personnel will
check the machine in time to confirm that the machine is
accurately installed according to the design and can
operate normally. This not only guarantees the high
precision of our products, but also maximizes production
efficiency.
Packing Leader pays attention to the coordination and
cooperation of employees in different departments. The
offices of different departments, such as design department,
research and development department, testing department,
assembly department and adjustment department, are closely
adjacent to each other, which can fully mobilize the division
of labor and cooperation of different departments and ensure
the high-speed production of machines with higher quality and
more accurate standards.
All the core components of the machine you can ask us, in
addition, all the parts of our machines are with
INOVANCE,MITSUBISHI ELECTRIC,FOTEK,CNSY, AIRTAC, CHNT,C-LIN
and other well-known brands cooperation.98 % of the spare
parts is available in stock and well managed by ERP
systems.