European Version Coarse Hammer Crusher in China

Product Details

European Version Coarse Hammer Crusheris engaging in crushing various rocks and stones with comprehensive strength not higher than 320 MPa into coarse powder and small particles, it is widely used in metallurgy, mining, chemical, cement, coal, sand-making, coal gangue, construction, refractory materials and ceramic industries.

European version coarse hammer crusher mainly consists of frame, rotor, support iron and grates bars. The frame is divided into two parts: upper part and lower part, which are welded by steel plates after being cut. Liners made of high mangaese steels within the frame can be replace after being worn out. The rotors consist of turn plates, pin shafts, and hammers which are grouped regularly in the mian shaft. The main unit drives the main shaft through the motor and triangle belts, which, in turn, rotates the rollers. Large materials entering the crusher through the feeed inlet are firstly crushed by the high-speed hammers, and then thrown fiercely to the support iron for further crusheing. Qualified materials crushed will be screened out and exit from the gap of the grate bars while the unqualified wil be left in the crusheing cavity to be further hammered and ground until reach the standard size. The size of the final product can be adjusted by changing the grate bars can also be adjusted according to different requirement. To avoid the plugging of the crusher, the proportion of water for the crushing materials is no more than 20%.

The Main specification of Shanghai European Version Coarse Hammer Crusher:

Note: Any changes of technical data shall not be prior advised.

Shanghai Clirik Machinery Co., LTD

Should you have any questions, please do not hesitate to contact me.

Phone:+*********

wechat:*********

qq:*********