SDC series bending Bending sheet follower car is
a bending machine auxiliary device which is used to
accessorily support the material when the bending
machine processing the large workpiece and commonly
used in the latter topping-off operation. It adopts the
independent control system, with no requirements for
bending machine system and types. The rotation and
lifting of the platform are driving by the servo motor.
The rotation mechanism consists of servo motor,
decelerator, reduction gear and multi-connecting rods.
The lifting mechanism has two types of manual and CNC.
Features of Equipment: 1.It is suitable for bending a
variety of large plate, could reduce the workload of
operators, and improve efficiency and accuracy; 2. It
could automatically adjust the following speed
according to the size of the mold notch, working speed
and plate thickness, to achieve the plate material to
follow; 3. It is equipped with automatic rotation axis
and lifting axis so as to ensure complete following; 4.
The following front bracket is easy to operate, the
front and back brackets could be adjusted, and are
convenient to installation; 5. Independent operating
system. Principles for Selection: 6. The selection of
lifting force shall not only based on the weight of the
workpiece, but also with refer to the size of the
workpiece; 7. It can meet the upward demands and can
also meet the demands on downward bending machine. For
down-action bending machine, only the CNC dual-axis can
be selected; 8. For positive and negative cutting
workpiece, only the CNC dual-axis can be selected; 9.
If the size of the workpiece to be bent is large, the
CNC dual-axis must be selected in order to take the
material conveniently; 10. As equipped with magnetic
scale, no special requirements for bending machine
control mode (including electro-hydraulic bending
machine, twist axis bending machine, all-electric
bending machine, under the moving bending machine,
etc.)