Actia Mercedes Benz Xentry Diagnosis VCI Original Diagnosis Kit 3 Multiplexer with Panasonic CF-D1 Tablet PC

Product Details

Description

Genuine Mercedes Benz Xentry VCI Diagnose Tool

Original available in original generation of dealer diagnostic scanners for Mercedes cars. The device was developed by Bosch. Mercedes Benz Xentry Diagnosis VCI Multiplexer supports a full range of service functions such as reading and deleting trouble codes , activations, coding, performer tests, programming and block coding, full SCN & DAS support. Mercedes XENTRY VCI Come in a compact rubberized case, does not have batteries, fans and display on board. An external power supply is not required, power supply is made from a diagnosed vehicle.

To All Buyer’s Pls NOTE.:Note.

Disclaimer company seems block all imitation clones device online programming from their server and no one can do programming online if your laptop is not registered with Genuine Mercedes it’s would not work.

Kindly note that After you receive Benz VCI C6, please contact us for TeamViewer activation, thank you ! Because:
Benz VCI software is frozen by the factory and needs to be activated using TeamViewer after receiving the package (contact at us email: *****) . After that, plug VCI C6 to the computer and the car, open the software to directly use without any settings.

Xentry Connect , A Mercedes dealer of the current generation, is removed from production: it is replaced by Xentry Diagnosis VCI from Bosch. Perhaps, Xentry Connect will be the last product of the Actia for Mercedes Benz. Unfortunately, Xentry Connect has become one of the most unsuccessful multiplexers for Mercedes diagnostics.

The NEW Xentry Diagnosis VCI is fundamentally different for the better from its predecessor : easy and convenient, without built-in PCs and hard drives inside, no fans, battery and display

Please Note: You do not need to constantly update the internal firmware, no external power required

Specification :

This is the Original Bosch Mercedes Xentry VCI:

Power supply: From the vehicle battery via the diagnosis connection cable or via a connected USB cable 8V to 28V
Clock rate 800MHz
RAM 512 MB DDR3 RAM
ROM 512 MB
Flash MASS STORAGE (opt) USB Memory Stick
User interface
LEDS 5 status LEDs
Acoustic signal beeper

Important: Diagnostic socket of a vehicle must be secured with a fuse of maximum 6A/ 32V.

Properties:

Dimension 168x115x45 mm
weight 2.29 kg
Power supply 750 mA
Imput voltage (fail-safe) 8to 28 VDC
Operating Temperature -40 CO -+80 CO
Storage Temperature -40 CO -+80 CO
Humidity at 25 CO 30 % – 95 %
Makimum operating height 4000m
Protection class, diagnosis connection cable not plugged in IP 30
Protection class, diagnosis connection cable plugged in IP54
Diagnosis connection cable
J1962 (ISO 15031-3) 26 pins

Total Package weight: 7.29 kg

Software Version.: 2020.12v

Certification: VCI, FCC, CE

TOP 7 Reasons to choose Benz C6 VCI

1. Use Xentry software for New Benz models (Does not support DAS)
2. With Keygen
3. Comes with encrypted dongle
4. Supports DoIP protocol
5. Supports Vediamo, DTS Monaco software
6. Supports WLAN + USB connection (Does not support WiFi)
7. Latest software : V2021.12
8: Multi-Language:Bulgarian / Danish / Greek / Spanish / French / Italian / Korean / Polish / Roman / Serbian Croatian / Turkish / Czech / German / English / Finnish / Hungarian / Japanese / Dutch / Portuguese / Russian / Swedish / Chinese

Mercedes Benz Xentry diagnosis VCI DOIP Pass thur interface Benz C6 Overview:
It works like Ecom.
You can use ordinary XDOS without VXdiag Driver.
Only config ecom and ready.
No wireless or wifi, usb and lan only.
DoIP: Support DoIP
Functions: Star Diagnostic & programming (SCN Coding)

Mercedes Benz Xentry diagnosis VCI DOIP Pass thur interface Features:

Functions

Like previous scanners for computer Diagnostics Mercedes, Mercedes Benz Xentry Diagnosis VCI Multiplexer supports a full range of service functions such as reading and deleting trouble codes, activations, coding, performer tests, programming and block coding, full Xentry support .

What are the prospects for Xentry Connect and Xentry Diagnosis VCI :

Xentry Connect , A Mercedes dealer of the current generation, is removed from production: it is replaced by Xentry Diagnosis VCI From Bosch. Perhaps, Xentry Connect will be the last product of the Actia for Mercedes Benz. Unfortunately, Xentry Connect has become one of the most unsuccessful multiplexers for Mercedes diagnostics.

The New Xentry Diagnosis VCI is fundamentally different for the better from its predecessor :

easy and convenient, without built-in PCs and hard drives inside, no fans, battery and display

Please Note: You do not need to constantly update the internal firmware, no external power required

IT SUPPORTS
Support DoIP, cover more functions during SCN Coding than SD C4/C5/C6
Functions including diagnosing, programming, simulation studying, repair information, automotive maintenance, technical service bulletin and so on
Diagnosis updates no longer necessary – firmware updates required on rare occasions
Does not need a power supply unit for external power supply
Dandy multiplexer with a small, sturdy construction (no PC core, battery, fan, or display)
Engines (All Gasoline & Diesel Systems)
Transmissions and Electronic selector Modules
Airmatic and Active Body Control Suspension Systems
Traction Systems: ESP / ASR / ETS / ABS / BAS / SBC braking systems
Supplementary Restraint Systems (SRS) / Airbag, All body modules OCP / UCP / LCP / SCM / SKF / KFB / RCM / DCM’s
Drive Authorisation System
Sam (Signal Acquisition) Modules
Electronic Ignition System (EIS)
Pneumatic System Equipment and ATA functions
Air Conditioning / climate control Systems
Instrument Cluster
Tyre Pressure Control
Parktronic System
Keyless Go
D2b Command & Audio Gateway (D2B and MOST networks)
TV Tuner
Headlamp Range Adjustment
Seat Electronics
Rvc, RST & Vario Roof modules
Automatic Clutch System ACS
M-Class Body Modules (AAM / EAM / DAS / SEM / VG Transfer Case)
Assyst & ASSYST + systems

Supported systems
Engine
Transmission
Climate control system
SRS (Supplementary restraint system)
ABS
ASR
MPL
GM
BENZ ORIGINAL ANTI-THEFT DASX SYSTEM
System «Keyless-Go» from Mercedes-Benz
OBD-II SYSTEM
Advantages
Light and easy-to-use
No built-in motherboards, hard-drives, fans, displays and batteries
No external power needed
No regular firmware update needed

How to configure OEM Benz Xentry VCI interface?

How to configure OEM Benz Xentry VCI Mercedes Benz diagnostic interface?
benz-c6-vci

Procedure:
configure-benz-c6-vci-1

Double click “ConfigAssist” on the desktop, select XENTRY Diagnosis VCI
configure-benz-c6-vci-2

Click on Configure
configure-benz-c6-vci-3

Press Continue
configure-benz-c6-vci-4

Press Continue
configure-benz-c6-vci-5

select Manual and enter StartKey
configure-benz-c6-vci-6

Save StartKey
configure-benz-c6-vci-7

StartKey installed successfully. Press OK to continue
configure-benz-c6-vci-8

Register success. Press Continue.
configure-benz-c6-vci-9

Click on “Couple VCI” to connect VCI
configure-benz-c6-vci-10

Configuration success. Quit.